Expert Answers about Tesla Model 3
- What is Towing Capacity of 2018 Tesla Model 3 with Stealth Hitch Installed
- While I wasn't able to find a listed capacity for this hitch on the installation instructions, the Stealth hitch part # 391TES317T has a 3,500 lb towing capacity and a 350 lb tongue weight capacity. I confirmed this with my contact at Stealth Hitches for you.
Your 2018 Tesla Model 3 on the other hand only has a 963 lb towing capacity as listed by Tesla. This means you would be limited by your vehicle's capacity, which in this case, is the lowest rated component.
view full answer... - How Much Ground Clearance Will I Have With The EcoHitch Receiver # EH84GR on 2019 Tesla Model 3?
- When we installed the EcoHitch Stealth Trailer Hitch Receiver # EH84GR on a 2021 Tesla Model 3(see install video below) we found the base of the receiver sat 3" below the rear opening for the receiver access panel. You will be able to use this measurement to determine exactly how much ground clearance your 2019 Model 3 will have in the event there were any changes in vehicle height or your springs have sagged more than the one we had in our shop.
view full answer... - How Far Does The Stealth Hitch 391TES317T Extend Past The Bumper On A 2023 Tesla Model 3?
- Yes we can! The Stealth Hitch Receiver # 391TES317T will stick out past the bumper by 2" on a 2023 Tesla Model 3. This is going to give you plenty of room for your Kuat NV 2.0 Bike Rack # BA22B and there will be no concern of the rack contacting the bumper. Even with the rack in the folded position, there should be more than 4" between the rack and the bumper which is plenty of room.
The Stealth Hitch # 391TES317T also comes with the towing kit, so you will have all of the components...
view full answer... - How To Find Longer Bolt for the 2 Hitch Ball with Internal Thread
- If the bolt that comes with the 2" Hitch Ball with Internal Thread part # EI2C-C is too short you'd simply need to take a trip to the hardware store and pick up a new 3/4"-10 bolt in the length you need. For reference, the included bolt is 2" long.
view full answer... - What is the Distance From Hitch Pin Hole to End of Receiver on Stealth Hitches Hidden Rack Receiver
- The distance from the hitch pin hole on the Stealth Hitches Hidden Rack Receiver # 391TES317 is 2-1/2". Once installed on your 2018 Tesla Model 3 it will stick out about 3-3/4" from the bottom edge of your rear bumper. You are also correct, using an extension typically reduces your capacity by 50%.
In order to avoid this problem I recommend using the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 6" Drop/Rise - 21K # 325-GH-623. The Gen-Y stacked receiver design does...
view full answer... - Undercover Access Hole Cover for EcoHitch Stealth Trailer Hitch Receiver Template
- For the EcoHitch Access Hole Cover # 306-XA2002 here are the instructions on how and where to drill access hole:
Place the bumper on the ground to allow marking on the inside floor of the plastic undercover with ribs.
Measure from the front of the plastic 26-3/4 inches along the center rib, if using a 3-1/2 inch hole saw. More hand clearance is possible if using a 4-inch hole saw but measure 26-1/2 inches.
Mark two points to use as start holes. Mark 3/4 inch from the center towards...
view full answer... - Weight of 2023 Tesla Model 3 Stealth Hitches Kit
- The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # 391TES317T for your 2023 Tesla Model 3 has a shipping weight of 67 lbs so you're looking at about 65 lbs for the kit itself.
The wiring and ball mount account for about 25 lbs though so for the main frame unit it's only going to weight in at about 40 lbs.
view full answer... - Tongue Weight Capacity of 2 Inch EcoHitch Trailer Hitch 306-X7373 for Tesla Model 3
- I checked with EcoHitch and can verify that the EcoHitch Stealth Trailer Hitch Receiver # EH84GR for a Tesla Model 3 does have a tongue weight of 300 lbs.
view full answer... - Recommended Hitch for a 2023 Tesla Model 3 for Towing a Light Trailer
- To tow a trailer with your 2023 Tesla Model 3, I recommend the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit item # 391TES317T. This hitch is custom fit and bolts to your Tesla with included hardware.
I really like the Stealth Hitches because not only is the receiver completely removable but their towing kits provide you with everything you need to tow a trailer. The included ball mount comes with a 2" hitch ball and gives you a 3,500 lbs towing capacity. The wiring harness...
view full answer... - What Is the Towing Capacity of the Stealth Hitches Hidden Rack Receive for a 2018 Tesla Model 3
- The Stealth Hitches Hidden Rack Receiver part # SH69VR which is a fit for a 2018 Tesla Model 3 cannot be used for towing which is why you don't see a towing capacity. Instead, you'd need to use the Stealth Hitches Hidden Trailer Hitch Receiver part # 391TES317T which is rated to tow 3,500 lbs. It comes with everything else you need as well to tow a trailer.
view full answer... - Dimensions of Stealth Trailer Hitch Receiver Attachments 1-1/4" and 2" Receivers
- The 1-1/4" Receiver Attachment for Stealth Hitches # 391RR1 is 2" from the end of the receiver tube to the hitch pin hole center and 6" from the end of the receiver to the vertical shank of the receiver.
The 2" Receiver Attachment for Stealth Hitches # 391RR2 is 2-1/2" from the end of the receiver tube to the hitch pin hole center and 6-1/16" from the end of the receiver to the vertical shank of the receiver.
view full answer... - Can I Tow a Boat with the Stealth Hitch on a Tesla Model 3
- From what I'm able to find, the 2018 Tesla Model 3 has a towing capacity of 2000-lbs (likely very different for dual motor versions), but I do recommend confirming that with your owner's manual. With that said, the Stealth Hitch # 391TES317T is a great solution to tow a light weight boat with your 2018 Tesla Model 3.
You'll need to know the total weight of the boat and trailer, as well as the tongue weight of the trailer to determine whether or not it is within the capacity of your Model...
view full answer... - Weight Capacity of EcoHitch for 2022 Tesla Model 3 When Using Hitch Extender
- The EcoHitch Stealth Trailer Hitch Receiver part # EH84GR which is a fit for a 2022 Tesla Model 3 has a 300 lb tongue weight rating. If you need to use a hitch extender like the Curt Hitch Extender part # C45795, this will reduce the weight capacity of the hitch by 50%. This is not just the case for the above hitch and adapter but any you use with a hitch extender.
view full answer... - Depth of Hitch Tube of Stealth Hitch Attachment
- The depth of the hitch attachment portion of the Stealth hitch part # 391TES317 is 3-1/2 inches from the pin hole to the back of hitch tube. This would work fine with your Thule bike rack.
view full answer... - Recommended Stealth Hitch for a 2022 Tesla Model 3
- I have two options for Stealth Hitches that fit your 2022 Tesla Model 3 depending on what you will be using the hitch for.
The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit item # 391TES317T has an included wiring harness and ball mount so you can tow a small trailer. This hitch also includes a 2" receiver for hauling accessories like bike racks and cargo carriers.
The Stealth Hitches Hidden Rack Receiver item # 391TES317 includes a 2" receiver for hauling accessories...
view full answer... - Is Tongue Weight Rating of EcoHItch for 2020 Tesla Model 3 Same As Vertical Weight Limit
- You are correct. The tongue weight rating of a hitch and the vertical weight it can carry are the same thing. So the EcoHitch part # 306-X7373 you have installed on your 2020 Tesla Model 3 would easily be able to handle the weight of a 40 lb carrier and 240 lb bike.
view full answer... - Recommended Wiring Harness for a 2023 Tesla Model 3
- The best wiring harness for your 2023 Tesla Model 3 is going to be the T-One Vehicle Wiring Harness item # TK35VR. This harness is custom-fit and plugs into existing wiring in the rear cargo area. This will give you a 4-way connector to control your trailer or accessories lighting functions.
The Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness item # 119250KIT you were looking at is a universal harness we typically recommend when there are no custom fit ones. This...
view full answer... - How Far Out Will the Receiver Tube Sit With the Stealth Hitch On a 2018 Tesla Model 3
- I have attached a photo of the Stealth Hitches Hidden Rack Receiver part # 391TES317 installed on a 2018 Tesla Model 3. As you can see, the hitch pin hole is pretty even with the end of the bumper. Therefore, if you are worried about clearance with folding bike racks or cargo carriers you should not have any issues.
That said, I don't have any measurements at this time as they are not something the manufacturer provides but rather something we take in house when we have an opportunity...
view full answer...
Go To Results